Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
The next thing we want to do is remove the skid shields. Generally speaking, there should be one here and one a little bit further back. Obviously, our rearward one is missing already. Use a 12-millimeter and get them out of the way.
Now that the skid plate's out of the way, we can see the two mounting bolts over here. There's also going to be two more on the other side. Remove all four using a 12-millimeter.
Awesome. Go ahead and grab this metal bracket off of there, and then grab the rubber. It should slide right off. Let's use a tiny bit of lubricant here. Go right along the surface area of the sway bar. Go ahead and get this rubber on there. That fits perfect. You want to make sure that it's the same size as the bar when it's closed. Go ahead and grab your bracket. It has this piece with the slot. That faces towards the front. You can hold it just like this, slide it on. Now you're going to do the same to the other side of the bar, and then we'll continue.
Go ahead and blast these holes with some copper never-seize. Start in your bolts. Go ahead and start that bracket up onto the bolt. Do the same to the other side.
All right, let's bottom out these bolts. We'll do the same to the other side, and then we'll torque them to manufacturer specifications. Torque these to 30 foot-pounds. Do the same to the other side.
Let's put our shield up on here. You have your mounting areas on these plates. If you want to hit them with some copper never-seize, it's not a bad idea.
Tools used
