Kit Includes: (1) Driver Side Corner Light (1) Passenger Side Corner Light
Specification
Side Location
Driver & Passenger Side
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Corner Light 2002-04 Ford F250 Super Duty
How To Replace Parking Light 1999-2007 Ford F-250
Created on:
Tools used
Phillips Head Screwdriver
Flashlight
1. Removing the Parking Light
Remove the two Phillips screws from the parking light bracket
Pull the parking light out
2. Servicing the Bulbs
Twist the bulb socket counterclockwise out of the light
Pull the bulb off of the socket
Push on the new bulb
Twist the bulb clockwise into the light
3. Installing the New Parking Light
Line up the holes on the parking light bracket to the bolt holes on the vehicle
Replace the two Phillips screws into the parking light bracket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to take you through servicing the parking light, the lower parking lights, underneath the headlight as well as the side marker lights. You may need to do this if you've had a little fender bender, or if they're just cloudy and dull and you want to change them and make them look nice. The only tool you'll need is a Phillips screwdriver.
First you're going to find two screws underneath. One there and then one right back in there. Okay, I'm going to fast-forward as I remove those screws. They will tend to drop down. They're kind of hard to get to back in there, so either a magnetic tipped screwdriver will help you or just make sure the area underneath is clear so when they drop on the floor you can find them easily. Also, a flashlight or some other kind of light to help you look back in there and see them.
This comes out. This bulb twists off and out. To service either one of these bulbs, I just pull it out.
All right. New parking light from 1A Auto. See? Nice and clear. Exact fit. If your old one is broken, or if you're replacing your old and cloudy ones, this will let's see. You've just got to put this in correctly. Put your light in. Socket to the right clock position here. Once you insert the bulb then turn it clockwise to lock it and then the same thing with the small side marker light.
Insert it and clockwise to lock it into position. There's a pin here and a pin over here. Make sure those go in like they're supposed to go. Probably the most fun part is just getting these screws in. This one's probably by far the most difficult. I take it, get it on my screwdriver, and I hope it stays. You can also put a little bit of glue on the tip of your screwdriver. I'll help the screw stay on it while you put it in there.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Phillips Head Screwdriver
Pry Bar
Magnet - Extendable
LHT05345
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Perfect fit, consider dropping/loosening the bumper for install
Ryan
October 17, 2023
Perfect fit on my '03 Excursion.
I had to drop my bumper a bit to access the mounting screws, which added to the the difficulty as these are "old bolts"...
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.