Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto 1 Year Warranty
Frequently bought together
Part Details
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. In this video, we're going to show you how to replace the license plate light, both the bulb and the light itself on the 2002 GMC Sierra, this is the same for pretty much any Sierra, Silverado, Tahoe, Yukon and Suburban of this generation.
To replace the license plate lights, if you're just looking to change your bulb, you reach back in here, you can feel the back of it and you twist the connector counterclockwise, now you can see here's the bulb right here. The bulb pulls out and pushes back into replace it. A lot of times you'll step on here or kind of miss the trailer when you're backing up and wipe out these lights.
You can either use a screwdriver or your hands. You push the light back and pull it out. You can see just a little clip on this end and it comes out. At 1A Auto, we sell the new ones. Ours comes in chrome, so maybe get a pair if you wanted to match. Push it in, then just give it a quick nudge with the heel of your hand. Just turn back up in there, get it to go in. Twist a little clockwise and you are all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Okay, friends, so, it's gonna be time to get started on this plate light assembly right here. If you were to look at it, you would see that it has this little tab. What we wanna do, is from the back side of this bumper, we would press on the tab, and that'll release this from the bumper itself. This one's obviously not in the best condition, so, we're gonna replace it. When I do these, usually I like to do them as a pair, so, they'll match. If you're not necessarily worried about it, you could, of course, paint it to match whatever color you need it to be.
With that said, I'm just gonna take my pocket screwdriver, I'm gonna come underneath the bumper, just like this. And then I'm gonna try to find that tab. I'll just push on that tab. Go ahead and grab onto the pigtail, give it a twist, counterclockwise, and remove it.I always like to remove the bulb. This should be a 194 bulb. Take a look inside. Make sure you can see that the filament is still in good condition, and the bulb is not discolored. I'll just reinsert it back on there. Double check the seal. Make sure your seal's in good condition. If it looks like it's torn or even missing, obviously, you're gonna want a seal.
Let's go ahead and take this, and, get it on there. Twist it clockwise to lock it in. Give it a nice tug. Make sure it doesn't come loose. At this point, you're gonna see you have a hookey-doo on this side. And, this is the side that we pushed in on to remove it. So, when we insert, we're gonna go at an angle, and we're gonna put this side inside, and up against there first, and then roll the other side in. Okay. Slide it in. It should click. Make sure it's nice and secure. That looks great. Let's just test it.
Tools used
Tools used
All right, to take out the plate light assembly, there is a clip on this side and a little latch on this side. So if you could push this forward, try to get it to slide out, and use a trim tool. Oh, that broke off. This slides out. It's kinda hard if you have a trailer hitch to actually remove it so if you try pushing that in, then you should be able to get that to release. This part will break.
This is how it looks on the new one. So it slides in the back, and it latches on that side. Take the old one, twist out the bulb, the socket assembly. You can take the bulb out. Replace the bulb while you're doing this. This is a 194 bulb. Slide it back in position, take the socket, and twist it. And then we're gonna slide it on like this. It's gonna slide in the back first and then push it on this way just like that.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the license plate light, both the bulb and the lens on this 2011 Chevy Silverado 1500. It's the same process on a large variety of GM trucks from 2001 to 2012. You won't need any tools for this job.
Here is your license plate light. Go up behind it, and when you reach up behind it you see there's a little tab there. Reach up and push that tab in and pop the light out. You can just pull it right out.
To change the bulb, twist the socket, pull the bulb out, push the new one in, and then twist it back in. If you do need a new lens you can see 1A Auto has exact matches, and it's exactly the same.
Twist the socket back in, push the parking light right back into place, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulb as well as replace the entire plate light assembly on this 2002 Chevy Suburban. It's the same part and similar process on the Suburbans from 2000 to 2006. We'll show you on the passenger's side, but the driver's side is the same procedure. The items you'll need include a new plate light from 1AAuto.com and a flat blade screwdriver.
On the back of your plate light you can just twist out your socket counterclockwise. Then you just pull the bulb out, push your new bulb in, and then you can twist the socket back into place. If you want to replace the entire assembly, just push in the tab on the side with the flat blade screwdriver and apply pressure while pulling it from the other side and it will pop free.
On the left is the old plate light; on the right is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Take your new plate light and push it into place, then twist your socket clockwise into place, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
