Replaces
Replaces Nissan Altima Fuel Pump Module Assembly Delphi FG1783
$503.95
Replaces Nissan Altima Sentra Exhaust Manifold Catalytic Converter Assembly Dorman OE Solutions 674-959
$475.95
Replaces Nissan Altima Front & Rear 16 Piece Steering & Suspension Kit TRQ PSA27561
$467.95
Replaces Nissan Infiniti 2 Piece Exhaust Manifold & Gasket Kit Dorman OE Solutions 1AEEK00350
$456.95
Replaces Nissan Altima Maxima Front Driver & Passenger Side 2 Piece Strut & Spring Assembly Set KYB Strut-Plus KYSSP00471
$392.95
Replaces Nissan Altima Maxima Quest Camshaft & Crankshaft Position Sensor Kit Nissan OEM NSEEK00014
$375.45
Replaces Nissan Altima Maxima Quest Timing Chain Set with Water Pump DIY Solutions ETS00058
$374.95
Replaces 2002-06 Nissan Altima L4 2.5L Automatic Transmission Front Driver & Passenger Side 4 Piece Drivetrain Kit TRQ PSA27202
$359.95
Replaces Nissan Altima Front 4 Piece Drivetrain Kit TRQ PSA27221
$359.95
Replaces 2002-06 Nissan Altima L4 2.5L Front & Rear 6 Piece Complete Strut Assembly & Shock Absorber Kit DIY Solutions SHO01503
$353.95
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
So, we've got our old key fob from our vehicle. We've got a new replacement case from 1AAuto.com. It is identical in design and I'm going to show you how to swap over the guts that are inside.
You'll take a quarter; pop it open at the bottom. The circuit board is in here. You can pull the rubber buttons out and then take the circuit board, slide that out. There is a plastic cover that matches the shape of the circuit board. Make sure that stays together. Take our new key fob and the rubber buttons. I'm going to place it inside.
Take a flat-bladed screwdriver and pop the battery out. Place the battery in, the 2025 battery, positive side down. Clip it in place. Take your two halves, clip them together. You get a fresh key fob, fresh buttons, and you're all set.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
