Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How To Replace Taillight Assembly and Bulb 1998-2004 Dodge Intrepid
Created on:
Tools used
Flat Blade Screwdriver
1. Removing the Taillight Assembly
Pry out the pins along the trunk insulation.
Pull the insulation back.
Remove the three thumb screws from the back of the taillight.
Pull the taillight assembly straight out.
Press the tab on the connector and disconnect the taillight assembly.
2. Replacing a Bulb
Twist the socket counterclockwise.
Pull the bulb straight out.
Push the new bulb into place.
Twist the socket clockwise to lock it back into place.
3. Replacing the Taillight Assembly
Twist out all of the sockets from the old taillight and twist them into the new taillight.
Reconnect the harness.
Line up the taillight and push it into place.
Replace the three thumb screws.
Replace the insulation.
Reinsert the pins into the insulation.
Brought to you by 1AAuto.com, your source for quality replacement parts, and the best service on the internet.
Hi. I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my twenty plus years of experience restoring in repairing cars and trucks like this, to show you the correct way to install parts from 1AAuto.com. The right parts, installed correctly. That's going to save you time and money. Thank you, and enjoy the video.
In this video we're going to show you how to remove the taillight, replace the bulbs and reinstall the taillight. And no tools are necessary, but you may need a pair of pliers to get the clips out of the insulation in your trunk. This is the same for any '98 to '04 Intrepid.
Just go and open up your trunk, and you have a liner here that's actually the pins are missing on this car, but they're are little pins like this, and you can use a screwdriver or a pair of pliers to pull those up. And then you want to pull your liner back, and then there's three thumb screws. One here, and one over there, and then one up in there.
So we'll just fast forward here a little bit as I take off those thumb screws. And if they are tight, there is a bolt head on them that you can use a pliers or something to get a little more leverage.
Once you have the taillight assembly out, here's a connector that disconnects the whole thing. Just press on that tab and pull. So here's your taillight out. Obviously you're not going to disconnect it if you're just replacing the bulbs. If you're just replacing bulbs, twist counter clockwise. Pull it out. The bulbs pull out and back in. And then there's a smaller bulb here as well. For the side marker. Pulls out.
And then at 1A Auto we sell if you've had a broken rear taillight, we sell the whole assembly. So if you back into something or something like that, don't fret. This is going to go in and mount everything the same. I'm not going to install the new one, because you can see that this one is fine. You wouldn't want to take your connector off of this one, and transfer all your bulbs and harnesses and everything.
And obviously installation. Reconnect our harness. Slide it back in place. Just guide it in. Put your three thumb screws back on. And put your insulation back in place, and your pins back in, and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
LHT05939
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.