Replaces
This part doesn’t fit a . Select from parts that fit.
Light Assembly Lifetime Warranty
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you how to change the bulb, as well as change the whole parking and marker light assembly on this 2000 S10 Blazer, same as the pickup.
Removing the headlights is pretty easy. There's actually two tabs right here that you pull up and off. Be careful not to drop them. Once those tabs are removed you pull the headlight forward and you disconnect or remove the headlight bulbs. You can remove them by twisting or you can disconnect the harnesses and there's also a side marker light that you would twist out.
Now with the light out of the way, you can see there's actually a bulb right here. There's a tab that you need to press right here with your finger and then twist this and you can pull the bulb out to replace it. Then you pull it from the socket here.
If you're looking to replace this whole assembly there's, I believe, a tab right back here and then a tab right here. I'm going to take and squeeze those tabs. Push it forward and then it comes out.
Now if you broke your parking light, here's my original and a new one from 1A Auto. You can see it's all the same. It's going to mount in there the same. To install, I'm going to put my bulb back into my socket, here. On the back of the light there are all kinds of different tabs and they line up with different slots in the grill. Put it back in. Make sure the tabs come through. Then, insert your bulb back here. Get it into the right place here and lock it in place. Now reinstall your headlight. It's a nice new one from 1A Auto to go with your new parking light. Connect everything and then the biggest thing to realize is there are two tabs here. They go down into slots here, so you want to plug in your high beam, and I did replace the headlights into the assembly here. Then make sure that the harnesses aren't interfering with those tabs. Push your light back in and lift up the back a little bit. You can look through, and lift up the back. Make sure it's going in there correctly. Push it on top, push it back in and then put your clips back on.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be replacing the parking lights on a 2001 Chevy S10 pickup, basically the same as most '98 to '04 S10s. This one does not have fog lights, the parking lights are different for ones that have fog lights and do not have fog lights. It's pretty easy. No tools are necessary.
We start by removing the headlights, which is pretty simple. There are two tabs that pull up, that lock the headlight into place and then you rotate the light forward and pull it out and then just use thumb and unlock the headlight harnesses. Then the side marker light bulb twists out and your headlight is free. Now we're going to remove the parking light and it's locked in by a double tab here. You use your other hand to press out on the light a little bit while you pushing on the tabs with a screwdriver and it will come unlocked pretty quick. Then there is a third tab that holds it in, on this one it kind of came right out but on the side and I'll show it to you later, there's another tab that locks it in. Then, once the parking light is out, it's a twist tab, it's a thumb tab and then twist and your parking light is out.
Here with the light out you can see the mounting tabs better. There's two alignment tabs there and there's the big square clip. This is the one that can be a problem when you're removing the parking light and it's actually easy enough to reach in from the side and hit that with your finger and pull it and have it unlock. I'll just continue to show you where those tabs go.
Insert the bulb and twist. It can be a little bit of a pain and then twist and put it in. Then push it back into place. Change the angle, here, so you can see from the top. Make sure that goes in correctly. Then push the other side. Then I also grab the inside of the grill just to make sure everything's in.
Now there are tabs in the headlights that go down in those slots, I'm going to spray them with a little oil just to make things easier. Those are the tabs, they go into the slots when you're putting the headlight in. Now we're going to get ready, we're going to plug in the harness here and what I'm going to show you next after we plug in the harness is you want to make sure that harness doesn't get pinched in. There's actually on those tabs that I showed you, there's a little ledge built on and you wrap the harness up and around that ledge. I'll show you here. I'm grabbing the harness and I'm bringing it up on top of the tabs that are on the tabs, if you have one of these lights in your hand you'll see what I mean. Then you put the light in and it's kind of a little ballet of pushing the bottom down, making sure those tabs go into those slots and then getting the upper tabs back into the radiator support.
You can actually look down into the holes and see everything pretty clearly. You can get it. Then once you got that, you put the locking tabs back in, which unfortunately I didn't get a great shot of here, but lock the tabs back in and you are all set. That's it. A grille replacement takes probably about 30, 35 minutes and if you do your headlights and parking lights at the same time you can really freshen up the front end of you S10.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
