California Air Resources Board (CARB) Certified: No
Specification
Emissions Option
excluding Partial Zero Emissions Vehicle (PZEV)
Engine Displacement (Metric)
L4 2.4L
Emissions Regulations: This product is not C.A.R.B. (California Air Research Board) approved.
Install Tip: You may be required to reset the vehicle computer after installation of this part.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
We cannot ship this item to California or Colorado, as it is not California Air Research Board approved.
In the state of New York, this item cannot be installed on California emissions equipped vehicles.
In the state of Maine, this item cannot be sold for or installed on a 2001 model year or newer, California emissions equipped vehicle.
Emissions information can be found on a tag under the hood or from a dealership based on your VIN.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.
Shipping is not available to a P.O. Box, APO/FPO/DPO address, US Territories, or Canada. Shipping to: CA California, CO Colorado, NY New York or ME Maine is prohibited due to state emissions regulations.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii, and US Territories.
How to Replace Upstream O2 Sensor 2007-12 Toyota Camry
How to replace Exhaust Manifold 2002-06 Toyota Camry
Created on:
Tools used
Socket Extensions
Flat Blade Screwdriver
Rust Penetrant
22mm Wrench
9mm Socket
Ratchet
Needle nose pliers
1. Removing the Air Intake
Remove the 10mm bolts from the air box
Disconnect the two sensors
Loosen the intake tube hose clamp
Unclip the hose from the air box
Remove the air box
Remove the air filter
2. Removing the Upstream O2 Sensor
Disconnect the O2 sensor connector
Unclip the wiring from the radiator hose clamp
Send the sensor through a 22mm wrench
Remove the sensor with a 22mm wrench
3. Installing the Upstream O2 Sensor
Apply copper anti-seize to the threads on the O2 sensor
Tighten the O2 sensor by hand
Tighten the O2 sensor with a 22mm wrench
Clip on the bracket
Thread the wire into the bracket
Clip the wire into the bracket on the radiator hose
Connect the sensor
4. Installing the Air Intake
Reinstall the air filter
Press on the air box
Press on the air intake hose to the air box
Tighten the hose clamp
Connect the two sensors
Tighten the 10mm bolts to the air box
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the hood. Pull the release handle down here above your knee. Release the safety, which is right here. This hood had hood struts. On this PZEV Camry, bank one sensor one is at the top of the exhaust manifold here. The wire goes over here to the connector. And can just see the connector. And you can just get to the lock port, it's kind of difficult. I'm going to remove the air box, just slightly out-of-the-way so I can get to this connector better and undo it before I remote the O2 sensor from the manifold.
Use a 10 millimeter socket and ratchet to loosen this up. There's a second one on the backside. Unplug this electrical connector here. Unplug this one here. This harness is actually connected to the air box, so can't pop it off. I'm just going to leave it here and move it to the side. Loosen this clamp, the intake tube. Lift up the air box. Make sure those are fully released. Take our air filter out of here so it doesn't get damaged. This harness here has a little push connector. I'm going to take these needle nosed pliers and just push them together. And just pop it out and put it aside. Put this aside so it doesn't get damaged.
Can see the sensor connector here for the O2 sensor. Push in the lock. Need a flat bladed screwdriver to push the lock open. Push the lock open with a flat bladed screwdriver and work the O2 sensor out, just like that. To un-clip it from this clamp that's holding around the upper radiator hose, going to squeeze these little tabs together. Just kind of unlock it. Just leave that in place. Lift this up. Pull it out of this clamp, this metal clamp. It keeps the wire from touching the hot exhaust and melting, so you'll want to keep that and use it. It should pop right off of the O2 sensor. We'll just put that over here.
I'm ready to remove the O2 sensor from the exhaust manifold. This is a 22 millimeter on the O2 sensor. Luckily, it's actually big enough for the connector to go through, so you can slide the box into the wrench on there. Get it seated. Give it a nice pull. There's the O2 sensor.
Here's the old O2 sensor and our brand new one from 1AAuto.com. The same length of wire. The same style connector. This should fit in the vehicle and work great for you.
The O2 sensor does come with anti-seize on it. I'm going to add a little extra copper anti-seize to it just before I install it. Make sure you keep it on the threads and away from the sensor tip. Hold the wire up. Thread it in by hand. You have to spin the wire around with it. Make sure the thread's in nice. Take a 22 millimeter wrench and just tighten it up until I feel the gasket crush. I'm going to clip this little bracket back on to place. Snaps over just like that. Clip my wire into it. Keeps it away from the exhaust manifold. Run the wire down over the plastic clamp, just like the original. Clip it back together. The connector is here. I'm going to line it back up just like the original and hold the back of this connector and push together so it clicks.
Reinstall the air filter. Take the upper air box. Connect those tabs underneath that lock it into place. Push it down. There's an alignment tab or opening here on the rubber hose that matches up with this tab here. I'm going to push this down. It should slide right over. Make sure that this claim is seated in the grooves. Tighten it back down. Reinstall the bolts that are holding the air box cover down. Don't forget the one in the back. Finally, don't forget this harness. Plug it back into the air box where I pulled it out of. Put it back into the mass airflow meter. Plug it back into this connector here. The air box is reinstalled.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
14mm Wrench
12mm Socket
Torque Wrench
14mm Socket
Rust Penetrant
Jack Stands
Brake Parts Cleaner
Socket Driver
Paper Towels
O2 Sensor Socket
22mm Wrench
Ratchet
Floor Jack
Wire Brush
12mm Wrench
33179
In Stock
Product Reviews
Loading reviews
4.68/ 5.022
22 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
18
3
0
0
1
Thanks
Jammia
March 11, 2017
It made a world of a different. My car is quiet now no longer sound like a truck??
Did the job just fine, with two caveats
Clint
March 11, 2017
I bought this to replace the exhaust manifold and catalytic converter on my daughters 2002 Toyota Solara with a 2.4l 4 cylinder. Overall, it was a pretty straight-forward swap; however, there are two things to be aware of. First, the OEM catalytic converter had the mounting bolts permanently mounted in it to connect to the exhaust pipe flange; however, this replacement part did not come with bolts, so you will need to buy them separately. They are threaded on each end; one end screws into the flange of the catalytic converter, while the other end of the bolts goes through the flange of the exhaust pipe (and then is secured by nuts). Also, there are heat shields that mount on the outside of the converter. For the lowest hole on the lowest shield, the replacement converter did not have the mounting hole properly located for the shield like the OEM part; however, there are plenty of other bolts securing the heat shield to the part, so still works just fine. Overall, I'm really pleas
Passed inspection
Ihuaku
March 12, 2017
I passed inspection with this converter. I was told by the dealer that i had to pay over $1000 for the part alone. 1aauto assured and guranteed that their product was just as perfect and i took them up on their offer and i am glad that i did. AND they include a 5yr warantee!!! I am impressed free shipping with great prices they deserve the 5 stars!!!
perfect fit
Tim
July 4, 2017
Installing this manifold could not have gone more smoothly. I did it while my family watched a movie. I even had time to go and gas up the car before they were finished.
2002 camry exhaust manifold-catalytic converter
D
August 12, 2017
would recommend this product to anyone who owns the corresponding 2002 camry needing cat OH10 direct fit easy install check engine light no longer a problem put in a new O2 sensor with the cat-downstream. Before you start the job make sure your flex pipe flanges are in good shape. mine were corroded beyond usable life.....could have welded them up a bit..but decided to replace the flex pipe with un monitored second cat also great service and live chat help
Toyota Camry Solara Exhaust Manifold with Catalytic Converter Assembly
M
August 9, 2018
This part came in and was an exact fit for my 2005 Toyota Camry. Had a local auto repair shop install the part for a reasonable price. This has corrected the issue with the check engine light and the P0420 code. So far so good. My car has nearly 210,00 miles and this was the first time the Catalytic Converter Assembly has been replaced.
Best & The Cheapest
D
October 18, 2018
I had my check engine light on & needed to renew registration... I got this part for at cheapest price with 1 A Auto, I was afraid of quality of the part but when i received it i was reveled & could fix the check engine light....They were also really swift delivering the part.........
Very pleased with my exhaust manifold purchase
M
December 10, 2018
My purchase of the exhaust manifold with catalytic converter assembly was great. No one else could come close to the price. I took it to the repair shop and had it installed and they said it was an exact fit. There were no problems with the install. I couldn't be happier with my purchase. The part arrived fast. I wouldn't hesitate to order other parts. Thanks for the great part and service 1AAUTO.
The best experience
J
February 19, 2019
The part perfect. Just like they said it would. The price was lower than anyone else. The part shipped the same day the order was placed. I ordered parts the next week for my other car. This Time I called to ask questions about the parts I needed. The girl on the phone knew her stuff and was very helpful. I needed front rotors , pads, and only one hub bearing. She avised me of a kit that included all of the parts plug another bearing. It was only 10 dollars more for everything. So I ordered the kit. Amazing customer service
03 Solara catalytic converter
Phil
March 16, 2019
Product was good overall, and got me through DEQ. But a minor irritation was that they didnt send you the stud bolts, will you connect down to the exhaust pipe below the catalytic converter dot other than this though it was a good value.
Perfect Fit
R
April 11, 2019
Couldn't beat the price and quick shipping of this item for a 2003 Toyota Camry. It fit perfectly.
Excellent fast service
M
September 7, 2019
Excellent, fast and accurate service.
Catalytic converter
David
December 25, 2019
Went on easy. Only one bolt did not line up. The one of the two bolts that the bracket that d bolt the converter to the engine on the passenger side.
Fit issue
Y
February 10, 2020
Big fan of 1A Auto, their YouTube videos have helped me multiple times. That being said, really disappointed in this part. It looks almost identical to the old part, except the bottom flange was rotated 5-10 degrees. This cause the mounting brackets to not being able to be secured at all without rigging it very unconventionally. At that point it was so late in the day, I didnt feel like taking it off to return.
Dan
May 1, 2022
I could not use this part because the car is being sold to someone in New York and your catalytic would not pass New York State emissions test. Your return policy is excellent I never open the box and you already gave me authorization to return it I appreciate that.
??
Joe
November 28, 2022
Perfect fit, got rid of the check engine light
Great product
Vance
February 14, 2023
Fit great and the quality is really good
bo
March 13, 2023
very good
David
September 26, 2023
good
Excellent. Will shop here again.
Felipa
October 24, 2023
Very good product and easy website to use. Fair pricing as well. Thank you!!!
Perfect fit
Rodney
May 21, 2024
Improved performance and took the check engine light off. First time installing front catalytic converter and only took four hours. Affordable and got here fast before my emissions was due.
1AEEM00636-2002-06 Toyota Camry Solara Exhaust Manifold Cat
Skeet
May 28, 2024
Fits perfect, the only thing that doesnt fit is the stock heat shield. Other than that?perfect match. 1A Auto always comes through with the absolute best parts, price, customer service, and shipping. 1A Auto is second to none!
Customer Q&A
Does this come with the gasket?January 9, 2019
Brandon L
10
Yes, this item will include the gasket shown in the website image.
January 9, 2019
Jessica D
I need this for a 4.0 cylinder do you all have that?March 17, 2019
Takisha C
10
Yes. Perfect
March 17, 2019
F R
10
Yes, this part fits a 4 cylinder Toyota perfectly.
March 17, 2019
M G
10
Sorry is ready in the car still running very good
March 17, 2019
Jonas L
10
Yes they do have it. Be careful cause they send me one without the bracket. And it was very hard to take the original ome off.
March 17, 2019
Ron V
10
This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit.
March 17, 2019
Emma F
10
Yes, according to the information you provided, this part will fit your vehicle.
March 18, 2019
T I
10
Is this part ca emision good to pass smog check
April 29, 2020
Marcos G
Is this catalytic converter legal for California?June 6, 2019
Juan S
10
At this time, our catalytic converters are not C.A.R.B. certified so they are not approved for purchase/use in California.
June 6, 2019
A C
The picture shows that it includes the top manifold gasket. Is the bottom flange gasket included also?June 25, 2019
Christian C
10
The top manifold gasket is the only one that we have that comes with this kit.
June 25, 2019
Emma F
I need a catalytic converter for Toyota Camry LE 4 cylinder 2004 that is approved by California state ?August 22, 2019
Ruben M
10
Thank you for your interest in 1A Auto, but unfortunately we do not have a California legal converter for your vehicle.
August 22, 2019
T I
I have a Toyota Camry 2006 and up to now the catalyst not ready.
Will this catalytic converter manifold fit with my Camry 2006 4cylinder?November 4, 2019
Nelson P
10
Thanks for your inquiry. This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit.
The information we will need in order to assist you is:
Your complete engine size
November 4, 2019
Christa R
Is it legal in california?December 3, 2019
Tim G
10
Thank you for your inquiry, but this part is not legal for use in California.
December 4, 2019
T I
Will this catalyst converter fit a 2003 Toyota Camry LE?February 3, 2020
Alfred S
10
Thank you for the inquiry. This part is listed to fit 2002-2006 Toyota Camry L4 2.4L models, excluding Partial Zero Emissions Vehicles (PZEV).
February 4, 2020
Christa R
Is this part legal in New York?May 22, 2020
J B
10
Thank you for the inquiry. At this time we cannot ship this part to the state of NY.
May 22, 2020
Christa R
Will this fit a toyota camry le 05? If it don't can i get a refund?October 14, 2020
Evonha W
10
This will only be correct for the 2005 L4 2.4L (excluding Partial Zero Emissions Vehicle (PZEV)). Please ensure to check this on your vehicle before placing your order.
October 14, 2020
Curtis L
Will this fit a us made 2004 Toyota camry Le?October 16, 2020
North C
10
Thank you for your inquiry. Yes, according to the information you provided, this part will fit your vehicle as long as your vehicle is excluding Partial Zero Emissions Vehicle (PZEV). Please let us know if you have any other questions!
October 16, 2020
Emma F
I need help with the bottom mounting. What's the stud bolt size and thread pitch?March 25, 2021
Travis N
10
We do apologize we do not have that measurement.
March 25, 2021
Corey M
Is it California legal?April 23, 2021
Juan S
10
We cannot ship this item to California or Colorado, as it is not California Air Research Board approved.
April 23, 2021
T I
Is this both front and back??April 24, 2021
Justin K
10
Hello, this is the front catalytic converter with the exhaust manifold and gasket.
April 24, 2021
Ricale A
If its CA approved why cant be shipped to CA? Please helpJanuary 21, 2022
John D
10
Although the part itself is compatible with vehicles with CA emissions, his product is not C.A.R.B. (California Air Research Board) approved, so it cannot be sold in the state of California. Many vehicles across the country have California emissions, but do not require the part to be C.A.R.B. certified to be sold in their state.
January 21, 2022
T I
This catal converter is allowed here in California?June 9, 2022
Ronald B
10
Hello, I apologize however, Shipping is not available to a P.O. Box, APO/FPO/DPO address, or Canada. Shipping to: CA California, CO Colorado, NY New York or ME Maine is prohibited due to state emissions regulations.
June 9, 2022
Ricale A
is this part legal for Colorado?December 19, 2022
Antonio M
10
We cannot ship this item to California or Colorado, as it is not California Air Research Board approved.
December 20, 2022
Emma F
I have a federal emissions car will this work in California?January 5, 2023
Adrian G
10
No, We cannot ship this item to California, as it is not California Air Research Board approved.
January 5, 2023
Andra M
Does this come with replacement bolts for the top and bottom?April 16, 2023
Dillon M
10
Mine did. The specialty bottom ones with springs were nice to have. I chose to reuse the original top bolts as they are harder material.
April 17, 2023
Kyle M
10
New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition.
April 17, 2023
Meghan R
10
No it does not
April 18, 2023
Destiny G
I have a 2002 Toyota Solara. Is there 1 or 2 Catalytic Converters? If theres 2, should I replace them both at the same time?June 7, 2023
John D
10
There are 2 on your vehicle. They both do not need to be replaced at the same time if one is still in good condition.
June 8, 2023
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Toyota is a registered trademark of Toyota Motor Corporation. 1A Auto is not affiliated with or sponsored by Toyota or Toyota Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.