Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video we're going to show you hot to replace the side parking light. It's the orange light right next to the headlight on any '93-'97 Ranger. The only tool you'll need is an 11mm wrench or a socket with a ratchet.
You want to remove the parking light which involves moving an 11mm nut right there. An 11mm socket with a ratchet or a wrench works fine as well. Now, put your fingers in behind here and it's held in by just a couple of pins that have to push through. Feed the wiring harness out. Here's the signal light.
If you're looking to just change this bulb, turn it counterclockwise, pull it out. The bulb just pulls out and pushes in. Here's a nice new light from 1A Auto. If you had some minor damage or whatever, you're going to go in and replace, just like the original. You can see we've put in some new trim and a new headlight. What you're probably going to want to do is unplug the bulb from the harness and then put it in and re-plug in the bulb.
This and this line up with little clips. You can just kind of peek in, get one of them in. You might need to push the harness back in a little bit to get the other one in. Make sure that your stud up here is lined up. Push it right back in. Put your 11mm nut back on.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
