Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by: 1A Auto your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out. The next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a side or rear-view mirror on this 2005 Dodge Durango, pretty much the same as any 2004 to 2009. We show you the driver's side. The passenger's side is pretty much the same. The tools you'll need are a small flat blade screwdriver, A Phillips screwdriver and either a 10 mm wrench or a 10 mm socket and ratchet.
Okay, take a small screwdriver and kind of push towards the front and pry up on your panel here. Okay, the back comes up and out and the front slides out and then there's three connectors. They just have little tabs. You push with your thumb, pull up and out. Now, in behind your door handle, just pry out this little cover here with a small screwdriver, and there's a Phillips screw there as well as a Phillips screw under there and one further back there.
I'll just fast forward here. I'm just using a Phillips screwdriver and removing those three screws I just showed you. Once those screws are out, just lift up the panel and then start pulling it out. You'll see a little blue clip back here. Pull that blue clip back off the rod, see, and pull the rod up and remove your door there. Your mirror connects in right here. There's a tab here. It's a little button. Just push that and remove; and then there's three 10 mm nuts. You need a socket ratchet like this or just a wrench.
I'm going to fast forward as I remove those three nuts and then, at the end here, you'll see I pulled the mirror off. You do have to just kind of close your door a little bit to get the mirror off as it kind of hits the A-pillar. Your mirror comes off. New mirror from 1A Auto designed to fit just like the original. Okay, it's going to go right on there. We're going to just about shut the door. Then, you get the harness in. Then, put the studs through. This does come with a gasket and everything. Take that shipping protector off. Then, open up the door. Just start this top one on.
I'll fast forward here again as I start all three of the 10 mm nuts back on and then tighten them. When you tighten them, you want to tighten them up nice and firm, but don't over-tighten them. You could actually break or damage the mirror if you over-tighten them. Okay, test the mirror. You put this panel back on. Make sure your harness is going through there. Hold this rod out. Put it into that blue clip and lock the clip on. Make sure your door lock goes through there. You just want to press it against. You can look back in here and see where all the little hooks are, in the front. Make sure that the front and rear go in flush with the door. You just want to make sure all the hooks are on there correctly. Slide down, oops. I realized that this just came out. Make sure that lock is on there. Slide it right down. Okay everything should be nice and tight around the edges.
Here, I'm going to speed it up again as I just reinstall the three screws, the two at the bottom and the one in behind the door handle. Those screws are what hold the door handle down in place. The harnesses are out. Slide this down. Slide the front end first and the rear. This can be a little bit of pain. I'll just put this little trim door back on.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free: 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
