Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Headlight 2001-11 Ford Ranger
How to Install Performance Headlight Assemblies 1998-2011 Ford Ranger
Created on:
Tools used
No Tools Needed
1. Remove the headlight assembly
Pull up on the two tabs above the headlight assembly
Pull out the headlight assembly.
Unplug the harness.
Replace the bulbs if that is all that is needed, otherwise replace the entire assembly.
2. Install headlight assembly
Adjust the adjustor bolts to match the old assembly.
Plug the bulbs and harness into the new headlight assembly
Put the headlight assembly into place.
Push down the tabs.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1aauto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you headlight removal and installation on this '04 Ford Ranger, pretty much the same for any '93 to present Ranger and no tools are necessary. Headlights on these Ford Rangers are really quite nicely designed and pretty easy. There are two tabs that you pull up on right back here. Once you have those tabs up, just pull your light forward. Now, here's the bulb. You can access the bulb easily. Pull this protector off and then your turn signal bulb, you twist, and it comes out, and your light is out. Obviously, you can service the bulbs.
The headlight bulb, you twist this, pull it out, and then you can pull the bulb out. Here's our original light, and here's the new light from 1A Auto. Now, obviously if your original light has been broken or something, you're going to want to replace it with a new one. You can also see, this truck doesn't have many miles on it, so the lens isn't too cloudy or faded, but if you drive your truck a lot of miles or in sandy conditions, these lenses can get pretty chipped up and clouded. A nice easy way to fix that is to just put a new set of lights in. You can see our lights are going to mount in the same. They have all the same connectors and everything so everything is going to go in just like the original.
One tip is before you put the new light in, just try and match it up with the distance. You can see that this adjuster is pretty close to the light there, so just preliminarily aim it. Take your new light and just try and get that just about the same distance. For now, obviously this light is fine, so we're going to put it back in the truck. Installing is just the reverse of the procedure. Put your signal in first, turn and lock, plug your light bulb in, and then carefully place it back in there.
I'm kind of looking down to make sure that all the adjusters are going into their holes properly. The lower one here is just a little bit off. There we go. Down there, just make sure that is all the way through. Then on this side, make sure that one there and the one down below, which is hard to see. Make sure those are all the way in. Push it really good. Push down on your tabs. You can see that mine's not in very well. Put it back up here. Push down and mount it nice and secure.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Gloves
5.5mm Socket
Ratchet
Safety Glasses
Pocket Screwdriver
LHT04094
In Stock
Product Reviews
Loading reviews
4.73/ 5.011
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
3
0
0
0
ford parts
K
July 16, 2017
headlights came much sooner then promised were easy to install and work good very happy
Perfect fit to replace my old assemblies
Mitchell
February 1, 2018
A minor scrape damaged the side marker on one side of my truck as well as shearing one of the mounting pins on the headlight assembly. It made sense to replace both sides and this kit made it easy. The parts fit as expected and the how-to video made it easy to do.
2005 ranger lighting kit
Milton
May 5, 2018
Hheadlights were excellent. Amber lights and a little problem. I had to modify the light hole to make them fit the light bulb
Ordered a pair of Headlights and Tail lights
D
February 7, 2019
Ordered a pair of headlights and tail lights for my 2001 Ford Ranger and the parts arrived just as posted and was very pleased with the package and product quality. It's obvious the team at A1 Auto take good customer service into practice. All parts fit correctly as advertised. I will be shopping here again.
Truck Accesorys
H
October 13, 2019
Part fit perfectly .Very satisfied
These have been great
T
April 26, 2020
These headlights are great! My son feels safe. Like them alot.
Great items!
C
May 6, 2020
Excellent experience all around! The lights matched up perfectly with zero issues! Easy to install! The glass is clear and the bulbs all worked. Fast shipping as well! Very happy with this transaction!
Great Product
R
October 20, 2020
The DIY Video on YouTube, to the replacement was smooth.
Very Satisfied
Richard
December 12, 2020
These replacement headlights and corner lights fit great. Easy to install and of good quality. Very satisfied.
Steven
March 30, 2022
good looking replacement. A lighter weight then OEM... will see how easily lens scratches over time. Instructions should warn to remove test lights and use new or bulbs from assembly removed for replacement.
A1 auto is great
Reuben
November 11, 2023
Video very helpfull and the lights fine. I would recommend.
Customer Q&A
Are the bulbs included?August 11, 2018
Tom O
10
Our headlights do not come with bulbs.
August 11, 2018
Peter L
10
Bulbs were not included with my purchase but the parts were excellent quality
August 12, 2018
Charles B
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.