Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we are going to show you how to replace the coolant level sensor on this 2002 Volvo V70. It is the same part and process for the V70's from 1999 to 2008. The items you will need for this include a new coolant level sensor from 1AAuto.com and a flat blade screwdriver.
First, pry up your power steering bottle and then just set it aside. Now, using a flat blade screwdriver, loosen this hose clamp and pull the hose free. The harness for the sensor is located right over here. Just push the tab and pull the harness free. If your hose starts leaking coolant, tip the hose up. Your sensor is located right here. Just pry it out and it pull right out.
On the right is the old coolant level sensor; on the left is the new one from 1A Auto. You can see they are identical and they are going to fit exactly the same.
Take your new sensor and push it up into place. Then reconnect the harness. Now line up these three tabs right here and push them down into place. Reconnect that hose and tighten the hose clamp. Now, take your power steering bottle, line those tabs up and push the power steering bottle down into place. You are all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
