Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Don from 1A Auto. I hope this how-to video helps you out and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the blower motor on this 2014 GMC Terrain. The only tools you'll need for this is a 7 millimeter socket and a quarter inch socket and a ratchet. On the passenger side, underneath the glove box, you want to remove this panel. It's held in with three 7 millimeter bolts. One more, the third one right there. We'll just fast forward as Don removes all three of those. Now pull this panel straight back so it releases this clip.
Next you want to disconnect your blower motor harness. To do that you just push on the tab and pull the harness free. Next you want to remove these three quarter inch bolts. There's two right here and then one on the back. We'll just fast forward as Don removes all three of those. Once those are removed, you can pull your blower motor down and out. You want to pull this harness free. Now your blower motor's free. Take your new one, push it up into place, and then replace those three quarter inch bolts and reconnect the harness. Take this panel and you want to push these two clips into these two slots. Push them back in and push the panel up and then replace those 7 millimeter bolts. Then you're all set.
We hope this video helps you out. Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2008 Chevy Equinox. We're going to show you how to remove and replace your blower motor for the HVAC.
If you like this video, please click subscribe we have a ton more information on this and many other vehicles. If you need this part for your car, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: 7mm socket and ratchet, ¼ inch socket, socket extension
Remove the two 7 millimeter screws, securing this panel underneath the passenger side floor. We'll do this using the 7 millimeter socket ratchet and extension. Once the two screws are removed, remove the panel from under the dash. You'll have to push it over to the passenger side to release it from its hook next to the blower motor. Remove the panel from the vehicle.
Remove this harness bracket from the bottom of the blower motor, push down and release the electrical connector. Remove the three quarter inch screws around the blower motor. We'll do this with a socket ratchet and extension. Support the blower motor while removing the last screw and remove the blower motor from the HVAC box.
Re-install the blower motor. Be sure not to pinch any harnesses, and make sure that the connector for the motor is facing the right way. Start your quarter inch screws by hand before tightening them down with your socket and ratchet. Reconnect the electrical connector and snap the harness retainer back into place. Reinstall the under dash cover. Remember it goes to the passenger side first and we'll have to pull it over. Reinstall the two 7 millimeter screws. We'll start these by hand and then tighten them down with a socket and ratchet.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
