Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet. In this video, I'm going to show you how to replace the air temperature door actuator on this 2003 Ford F250. This is the same for any '99 to '07 F250, F350, any of the Super Duty pick-ups that have manual controlled air conditioning.
The symptom of this going bad is that when you turn your temperature on your AC system to hot or cold, or whatever, you're just not really getting the air temperature coming out of the vents that you want. This air door is actually pretty easy. Open up your glove compartment. Squeeze the side. Squeeze that side and glove compartment comes down. Your actuator is right here. Disconnect the harness. Disconnect the harness by pushing up on a tab here and pulling out. Now you just need a flat blade screwdriver right in under there. Pry up. Then go further back and pry up. The actuator comes up and out. Here's our old one. Here's our new one.
You can see that the actuators are in a little different position, that's more like that. From looking at it as it's sitting in the truck, this one is like that. It's turned just a little more like that. What I'm going to do is put this one up in the hole. You can't really see it, but you can feel the hole. See where the tip of my finger is right down here, that's where the hole is that the actuator goes into. I'm going to put my actuator up in there. Make sure my harness is out of the way. The shaft is going down in. Now what I'm going to do is I'm going to turn it. It pushes down a little more. Now bring it back where it should be. Now these are wind up. Push it down on. Plug it in. Then we hang a little box up. Push it in. Push it in. You're all set.
We hope this helps you out. Brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free: 888-844-3393. We're the company that's here for you on the internet and in person.
