Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts, and the best service on the internet. Hi, I'm Mike Green, I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years' experience, restoring and repairing cars and trucks like this, to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
I'm going to show you how to replace the driver's side master window switch on this 2000 Chevy Blazer, same as any of the Blazers and the Jimmy's. The only tools you'll need are a couple of flat blade screwdrivers. I'm just going to lift up on the front, on the pale here, and then pull it out like that. Then on the backside, you've got two connectors to release. There's this one, this tab right here, you want to put a screwdriver in there and pry it that way and push that tab back and then pull that one out. This one is usually more difficult. Probably use two screwdrivers, put one in here and pry that way, because this tab locks it, and then use your other screwdriver to pry up at this point right here. So this one, put the screwdriver in, I'm kind of pushing on it a little bit with my hand and then you've got to grab on really tight, really pull. This connector, it's difficult to get out sometimes. It comes up and out. Then on this one like I said, you want to pry there.
Now you can see in there how that grey tab is unlocked, if I press it back down in, you'll see it lock in. So that's when you want to pry that out. So again, pry that and lift up with this one, so that you have it unlocked, then grab hold of this connector, and rock it back and forth. I'll show you on my new switch, you can see the switch is just held in by two tabs at the ends. So, what you want to do is attach it down in here. So I'm going to insert this screwdriver from this side and I'm putting the pressure where it's reinforced here, so I'm going to put this screwdriver in right there, the screwdriver's probably going to go flying, and pull the switch. The switch comes up and out. Then the new switch from 1A Auto, see all the same graphics, it makes it all nice and fresh. I'm just going to install the exact same way. I'm going to put the front down in first, actually put the rear down in first, I've pushed it in, then reconnect. Back in.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free, 888-844-3393, we're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we'll show you how to replace the drivers, or the master power window switch on this 2003 GMC Sonoma. It's the same as pretty much any of the four-door Sonomas from this era. The only tools you'll need are a couple of flat blade screwdrivers.
Start by grabbing the front of your switch plate. Push back and pull up. It should come out. You want to use a screwdriver. On this one there's a tab right here you push, this gray one. Put your screwdriver right down in here and pry out. Here there's a tab, then here there's a tab. For this one here, it's not unheard of to have to use two screwdrivers. Put this one down in so that the tab that locks it is interfered with by the screwdriver. I use another one to pry up. Get the connector moving.
The switch is pretty easy to get out. You want to go down between the gray and the black plastic and pry out while you're pulling on the switch. Same thing back here, between the switch and the gray plastic bezel. Get your screwdriver in and it comes right out.
New switch from 1A Auto. Exactly the same, so they go in there and it clips right in. Just going to have to put it in, push forward a little bit, then get the back down in. Now I can plug everything back in.
Again, the back kind of locks in first. Then the front goes down in.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the switch pack on this 1996 Chevy Tahoe. We show you on the driver side master switch pack. However the power window switch on the passenger side is a similar procedure. The items you'll need for this include a new switch pack from 1AAuto.com and a flat blade screwdriver.
Start off by prying up the back of your switch pack. You just want to pry it up with your screwdriver so you can get your fingers underneath, then just lift it up, and then slide it back.
Now, using your flat blade screwdriver, push the tabs on these harnesses, and pull them free. Now you just want to pry out this tab on the switch pack, and then just pull on the switch pack while you do it. Then it will pop up and out.
On the left is the old switch pack; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same.
To install your new switch pack, you want to push the front end in first, then just kind of pull back right here, and push the back end in. Once it's pushed down into place, you just want to reconnect those two harnesses. Now, slide this tab forward, and then push the back end of your switch panel down into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
