Replaces
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ year's experience restoring and repairing cars and trucks like this, to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we'll be showing you how to replace the driver's master-power-window switch. The only tool you'll need is a T27 Torx driver. This is on a 2001 Chevy Impala, same as any 2000 to 2005 Impala. There are two Torx screws here. Just trying to do all this in real time, not trying to bore you too much. Maybe you're replacing this because one of the switches isn't working for you, or the lockout's not working. It's a pretty easy process. Remove these screws; put them over here by handy magnetic tray.
My tools, also. All right. Then this just comes right up and out. Okay. Pull a little bit. Then all of these connectors, you just find where the lock goes up, and you press with your thumb and then pull it. That one and this blue one. You might use a screwdriver or something to help you press on those teeth. Okay. At this point, it's really easy. You just use your fingers or maybe you use a screwdriver to help you. You pull the plastic. Let's get one side. We got one. Oops. You want to be careful not to break here your trim panel. Once you get one side going, you just hold it and then, there it is. Easy enough. Then you put your new one back in. Reverse the procedure. Let's see; oops. Obviously, it's got a little thing so you can't do it wrong, which I tried to do. Okay. Put it back in. Connect your harnesses again. Put the trim panel back in. Screws. Both back in. I won't bore you with all the details. Then, tighten them up pretty good. Tighten just about as much as you can with a screwdriver-type tool and that'll hold it all together. Pretty easy thing.
Hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Feel free to call us toll-free: 888-844-3393. The Company that's here for you on the internet and in person. Thank you.
