Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll show you how to replace a tailgate cable on this '04 Ford Ranger, same as pretty much any '93 on up Ranger. All you need is a T45 Torx bit and it's a pretty simple replacement.
Tailgate replacement on this ranger is pretty easy. Use a T45 Torx bit. You want to make sure, if you're taking tailgate cables off, that your tailgate is supported because once you remove this tailgate cable, you don't want the tailgate to drop down and get dented on the bumper. My other tailgate cable on the other side is good so I'm going to remove this bolt and lift it up with my knee a little bit. Carefully allow that other tailgate cable to do the work here. Now, here on the upper end, you basically just need to pull this tab back and the cable comes off.
Obviously putting it back on, pull it down, and then put in your T45 bolt. Now, the bolt is shouldered here so you want to make sure that gets into the cable, and it doesn't hang up like that. That'll get your cable pinched. Make sure it goes into the cable. You might have to pull out on the bolt to get it going. I'm actually pulling out with the cable. Now, you tighten the bolt and the cable still flexes
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you tailgate replacement on this '96 Ford Ranger, same as any '93 to '97. It's pretty simple. You do need a T45 Torx bit with a ratchet and you may require another flat blade screwdriver as well.
Tailgate replacement, is really pretty easy. Before you do one side, make sure the cable on the other side is working or support the tailgate, because when you take the cable off, you don't want the tailgate to drop down, because you'll scratch and dent it. I'm just kind of lifting up on the tailgate here and you can just pull back and pull the top of the cable off like that. Here are two important things. You need a T45 Torx driver. The other important thing is that these cables have a left and a right to them. The same cable does not fit both sides. I'm going to speed this up here and run into something that you may run into. The bolt comes out a certain way and then it will not come out the rest of the way. It just kind of keeps spinning. I'll show you next how to take care of that. You make it to a point here where you feel like you're endlessly turning and it's not coming out. I did on this one. All is you do is you take a screwdriver or something and pry out and get some force on that bolt to go that way and keep turning it out and eventually it will come out the top.
Obviously, resetting is pretty simple. Like I said, these are different from side to side. You have this like that. It's totally different when it's that way, so you want to put this one. There's a little clamp in here. It just fell down. Put it back up here. There's a little lock washer in here. If you can get it back on, that's good. If you don't get it back in, it's not the biggest deal in the world. I just dropped it right down in there and put your bolt through. Here again, you may have to push on this bolt while you're starting it in. Okay, the bolt's shouldered, so you want to make sure that the cable's all the way out against the head. Once you get it tight, the cable should still turn freely. You need to lift your tailgate a little bit, put cable on and lock it in place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to be working on our 2001 Ford Ranger, showing you how to replace tailgate cables. If you enjoy this repair, we've got many more videos for Ranger as well as other vehicles. Please click subscribe. Also check out 1AAuto.com.
Here are the items you'll need for this repair: flat blade screwdriver, and a T45 Torx driver.
Open up your tailgate, and you should know where you're cables are. They're right here on the side. A lot of times, one of them breaks or they fray, and they can stab you. You just need a T45 Torx driver on a ratchet handle. Remove this bolt.
If you're tailgate cables are broken, just make sure you have something supporting the tailgate while you do this. Then, these little locks can usually be just pulled with your thumb. Take a flat plate screwdriver, pry them up, pull the cable off.
To reinstall, just reverse the procedure. Put the cable on. Lock it down in place. Then start your bolts. Again, it helps to lift up a little bit. These cables do have a side. Cable comes in here. There’s a short distance to this tab, and a longer distance to this tab. You want to have the longer distance facing down. There's a tab right there. Put your bolt in.
This is a shouldered bolt, so you want to make sure you hold the cable out on the bolt while you tighten it up. Once you get it tight, just make sure that the cable does move freely, and make sure the first few times it goes down when you shut the tailgate.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
