Kit Includes: (1) Passenger Side Tail Light (1) Driver Side Tail Light
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Tail Light Housing 2007-14 Chevy Suburban
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Tail Light
2. Installing the Tail Light
Press the tail light onto the vehicle
Tighten the two Phillips screws to the tail light
Connect the wiring harness
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
You'll need a Phillip screwdriver, which is the one with the four-point tip. Open up your tailgate. There are two Phillips screws that hold the tail light in place. Remove those. The harness connects in at the bottom at the corner. Press the little tab here. There’s always a little bit extra sand and stuff in here. Disconnect it. And then there are two pins on the side, so if you just shake it a little bit, work your fingers in under here, and then pull the light straight out. Pull your light up and the harness out. The original light from our Suburban and actually there's nothing wrong, but a lot of times you back into something and you break the light or somebody accidentally sticks a two by four in it or something like that.
The new light from 1A Auto, see it's exactly the same as the original. Obviously it’s a nicer, newer shape. Do this if you just want to make your car look a little fresher. On the back side, everything's exactly the same. The sockets are little bit different, but everything's going to bolt in, install, and function just like your original. The original connector and new connector are exactly the same.
Sometimes these plastic grommets will break, so you can use the new ones or just take them off. Slide the harness down in, put the light in place. Make sure the pins go into the body plugs and reinstall your two screws. Underneath, let's just clean some of that dirt off of the old connector. The new connector plugs right in.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
LHT07493
In Stock
Product Reviews
Loading reviews
4.67/ 5.06
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
1
0
0
C
January 4, 2018
The lights are a perfect fit and look great.
Thanks 1A auto.
Replacement for 2008 Chevy Tahoe
Ryan
April 18, 2019
I also ordered these in addition to new headlights for my daughter's 2008 Chevy Tahoe.
These were exact fit replacement tail lights and very easy to install.
Another highly recommended product and as always...1A Auto is exceptional!
2009 Suburban Tail Light Assembly
Kevin
May 4, 2021
I purchased this pair of tail light assemblies for a 2009 Chevrolet Suburban LT. When I received the lights, they had been damaged in shipping. I submitted a cliam on 1A Auto's website, and they immediately shipped a replacement at no additional charge. These tail light assemblies fit the vehicle correctly and came with everything needed to replace the factory tail lights. Just plug and play. I am very satisfied.
Larry
January 3, 2022
Ordered both Tail Lights. Shipped FAST and received in a couple of days. Left one fits perfectly, but the right one not so much. It doesn't install into retaining clips quite far enough and therefore catches on the rear lid along its left edge.
Easy rear taillight replacement
Charles
January 24, 2023
Exact replacement, included is the wiring harness and bulbs. only took 15 minutes each to change out.
Pamela
April 27, 2023
Looks great, fit perfectly well
Customer Q&A
Does this come with light bulbs and wire harness?October 20, 2017
T R
10
The bulbs and wiring are not included. You may reuse the originals or purchase separately from another source.
October 20, 2017
Alex P
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.