Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green, one of the owners of 1AAuto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my twenty plus years of experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video we are going to replace the ignition lock cylinder and key on this 97 Intrepid. The only tools you'll need are T30 and T15 Torx drivers. If you replace this, you will need to keep the new key that comes with the ignition lock cylinder as well as your old key to work the doors. Take a 10mm wrench and disconnect your battery cable. To remove this, first thing, T30 Torx bit. Up underneath here, there's a screw to remove the tilt lever. Up and underneath, there is, I see two T15 screws there, another one there. There's one way up in that hole there. Way up in that hole there and then way up in that hole there. You're going to tilt. While were going, you can kind of reach in there with your finger and pull and still tilt. Make sure it's tilted all the way up.
We'll fast forward as I just I remove those six T15 Torx screws. You can see the silver ones that are at the bottom are shorter and the others you have to reach up into the holes or the cavities are longer screws. On the bottom one you kind of pull down and out. Over the key cylinder reach in, lift down and this one comes up and out. Once you have all the trim off, go right underneath the lock cylinder here and there's a little square button right there. That's where you put the key in. you want to turn it to the run position. Okay. Flip that button. Shoot up with your Torx driver and pull it right out. This is a lock from 1AAuto. I just want to make sure this O ring kind of slid down. The O ring belongs right into that groove there. Make sure you have your button down. Close it down.
Place our top panel down in first. Put it back up. I'm putting the bottom panel in. We're going to start the small bottom screws first. I'm not going to make you watch me put all those screws in in real time. Well fast forward it here. You start the bottom screws. Leave them kind of loose so you can move things around a little bit. Get the top in place. Start those three longer screws. Once you have them started, go back around and tighten them up. You tighten them they need to be tightened lightly. You want to make sure you don't strip any of the plastic or anything like that. Okay. Once you've done that, put the tilt lever back on and reconnect your battery. Reconnect the battery cable.
We hope this helps you out. Brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet. Please feel to call us toll free 888-844-3393. Were the company that's here for you on the internet and in person.
